49
SKOPE TME-N ActiveCore
Replacement Procedures
Service Manual
Electronic Controller
Controller
Location
The electronic controller is located within the electronic controller box
assembly.
To access the controller
QC Terminals
The terminals at the back of the controller are locking QC terminals, which
cannot be pulled off without pressing in the locking tabs.
Use needle nose pliers to unlock and gently remove the terminals.
1. Disconnect the chiller from the power supply.
2. Open the electronic controller box assembly by undoing the two fixing
screws at the rear of the assembly.
Note:
On one door cabinets it is
necessary to move the unit back to access the controller box assembly.
