27
SKOPE TME-N ActiveCore
Installation
Service Manual
Door Handles
Fitting Door
Handles
For transit purposes the door handles may be packed separately inside the
cabinet. If the door handles are packed separately, follow the steps below to
fit them to the door/s.
To fit a door handle
1. Remove the handle/s from inside the cabinet by carefully cutting the cable
ties securing the handle, and remove the packaging.
2. A metal spring clip is
fitted inside the handle
mounts at each end of
the handle.
Ensure that the spring
clips point up.
3. Locate
BOTH
handle
mounts simultaneously
onto both door brackets.
Then push the handle
down onto the brackets,
until the handle locks
into place.
4. If the handle does not lock into place, check that the spring clips are
pointing up and try again.
If only one end of the handle locks into place, unscrew the door handle (see
over page), and refit ensuring both of the handle mounts are located onto
the brackets before pushing the handle down and locking into place.
Handle mount
Spring clip
(pointing up)
Handle
Bracket
Front of
door
Bracket
CAUTION
Ensure BOTH handle mounts are located before pushing
down.
