12
Electronic Controller
Service Manual
SKOPE TME-N ActiveCore
App
Categories
Various options are available in the app menu to provide information about
the connected controller and it’s cooler. Depending on user access level,
some menu options may not be available.
Home screen
The home screen shows a graphic representation of the current state of the
cooler being controlled.
Output control
Provides control of the controller input sensors and switches, and output
relays.
Edit parameters
Provides access and editing of individual controller parameters.
Note:
Parameter changes must be recorded on warranty/job card.
It is not recommended that parameters are changed unless absolutely
necessary. If incorrect parameter settings are suspected, reload the
complete parameter set.
Note:
Updated parameters are not applied until
DISCONNECT has been selected from the menu (after loading new
parameter set).
Load parameter file
Allows reloading of cooler default parameter set or changing to new
parameter set. See “Replacing the Controller” on page 50 for instructions.
Note:
Updated parameters are not applied until DISCONNECT has been
selected from the menu (after loading new parameter set).
Statistics
Information from the past seven days on cooler activity including
temperatures, door openings and alarms.
SCS info
Controller version and cooler asset information.
SCS setup
Add or change SCS info (see above).
Disconnect
Disconnect from currently connected controller.
Settings
Change app general settings.
