Skandika Fitness MONTREUX Series, Инструкция по сборке и руководство пользователя

Страница: 40 / 92

40
Assembly of handlebars support tube and cables
Pull the computer cable (upper) (47) out of the handlebar post from the bottom end and connect it with
the motor cable (51) from the main frame (1). The upper end of the computer cable should hang a few
cm out of the upper part of the handlebars support, so that it can be easily connected to the computer
later on. Put the handlebar post (5) into the main frame ) [be careful not to squeeze any cables!] with
the curved washer (11A), flat washer (11), spring washer (12) and Allen bolt (14).
Then fix the handle bar (48) onto the handlebar post (5) with the protecting cover (55), bushing (63),
spring washer (64), flat washer (65) and T-shaped knob (66).
You may adjust the angular to your individual convenience before fixing the knob (66) tightly.
SET-UP