Skandika Fitness MONTREUX Series, Инструкция по сборке и руководство пользователя

Страница: 48 / 92

48
If you go on training with the same speed the computer will make an alarm sound after 3 minutes
(6-times beeping for 30 seconds). The training will be stopped automatically. The difficulty will be re
-
duced to 1 (very easy) and WATT to 0. You can interrupt the alarm also by pressing any button. To
interrupt your training press the „Start/Stop“-button.
If you press the Reset-button it is possible – but only during stop-modus (training break) - to change
the program mode or shift between the 4 main modes. If you press the Reset-button longer than 2
seconds the above mentioned restart of the computer will happen.
2. Programme
Within this mode you can exercise with a program profile (preset). Mountain- and valley courses:
After selecting Program (Programme) and Mode/Enter „P1“ starts blinking. Choose one of the 12 pro-
grams (P1 to P12) by pressing the arrow buttons (Up resp. „Down) and press Mode/Enter to use it for
your training. The profiles of the 12 programs P1 to P12 are printed on the computer for your informa
-
tion also.
It is also possible to input target values during the program training. Watt input is not possible (only in
the manual modus you can enter watts). Use in the same way the „UP/DOWN“-buttons and ENTER to
input target values eventually.
It is also possible again not to enter any target values ( just press Start/Stop again). If you have entered
some target values, the computer will beep again 6-times to give you a sign to stop.
If you don’t use target values, the program will change to the next segment after 0,1 km. When you
press the RESET-button at least 2 seconds all values will be reset to zero. Now you can change in a
different function way (the program will be interrupted).
Program
number
COMPUTER | USE