Sirona sirolaser blue, Руководство по эксплуатации

Страница: 14 / 58

60 90 570 D 3485
14
D 3485.201.04.09.02 09.2007
3 Introduction
WARNING
Never direct the laser beam toward paper, plastics or dark surfaces. They may
catch fire or be damaged due to the high temperatures produced by the laser
beam.
WARNING
Laser plume must contain tissue particles. There is a risk of contamination! Al-
ways wear a face mask.
Observe the following in addition:
NOTICE
i
The unit must only be operated in rooms that comply with the requirements of
Council Directive 89/336/EEC. The applicable national or local legal regula-
tions must be complied with.
CAUTION
Avoid interference of the laser emission with optical sensors of devices oper-
ated in the vicinity of the SIROLaser.
3.3 Transport and storage
3.3.1 Transport and storage
The SIROLaser is supplied in a case that ensures proper and easy transport.
However, please observe the following:
CAUTION
Do not leave the laser unit in a car parked in the sun. The temperature inside
the car can reach levels that may damage its components.
To ensure appropriate storage, the laser unit must always be kept in the case
supplied.
When stored in the case provided by Sirona Dental Systems, the SIROLaser
withstands the following environmental conditions:
z
Temperatures from -40° C (-40° F) to +70° C (+158° F)
z
Relative humidity from 10 % to 90 %
z
Atmospheric pressure from 800 hPa to 1060 hPa
When stored in its original transport packing, the SIROLaser withstands the
following environmental conditions:
z
Temperatures from -40° C (-40° F) to +70 °C (+158° F)
z
Relative humidity from 10 % to 95 %
z
Atmospheric pressure from 800 hPa to 1060 hPa
3.3.2 Operating conditions
The SIROLaser may be operated in the following environmental conditions:
z
Temperatures from +10° C (+50° F) to +33° C (+92° F)
z
Relative humidity from 10 % to 95 %
z
Atmospheric pressure from 800 hPa to 1060 hPa