Sirona Heliodent plus, Руководство по установке

Страница: 20 / 76

62 14 972 D 3507
20 D 3507
.
031.01.07
.
02 11.2010
Installation Sirona Dental Systems GmbH
Installing the support arm and scissor arm Installation Instructions HELIODENT
PLUS
5.2.3 Installing the scissor arm
1. Push the washer (V (inside diameter 20 mm)) over the arm cable (F)
(Leave the scissor arm in the package for this step).
2. Place the washer (V) onto the spindle (E).
3. Remove the scissor arm (P3) from the packaging.
4. For transport and for the next installation step, support the scissor
arm on your shoulder.
5. Route the arm cable (L1) downwards through the arm and insert the
scissor arm. Make sure that the washer (V) does not fall off during this
step.
6. Push the retaining ring (D) through the arm cable
P3
E
F
V
CAUTION
Risk of injury
Do not fold up the scissor arm in the uninstalled state.
Carefully transport the scissor arm in the unfolded state!
NOTICE
If the arm is to be laid down in the meantime, put it back in its packaging.
V
L1