10 Operation light, tumbler filling, cuspidor flushing, purge
Sirona Dental Systems GmbH
10.3 Tumbler filling with automatic sensor control (Special equipment, not available in all countries)
Operating Instructions C4
+
59 06 313 D 3382
52
D 3382.201.01.13.02
Hydrocolloid (continuous operation)
After the filling time of 10 seconds or before the filling
time of 2 seconds, the following appears on the display:
CUP FILL TIMER HYDROCOLLOID
An unlimited time is then set, as is required for the hydro-
colloid function.
However, when you activate the chair program
S
, the
last saved tumbler filling time (2 – 10s) is always started,
i.e.
no
continuous operation!
You can start continuous operation only with the tumbler
filling key.
10.3
Tumbler filling with automatic sensor control
(Special equipment, not available in all countries)
Functioning of the automatic sensor control
With this tumbler filler, the automatic sensor control rec-
ognizes the filling level of the tumbler.
When you place the tumbler beneath the tumbler filler,
the tumbler will be filled automatically.
After the preset filling level has been reached, the water
flow stops automatically.
If the tumbler is removed before the preset filling level
has been reached, the water flow stops immediately.
If required, the tumbler can be refilled manually by
pressing the corresponding “tumbler filling” key.
Setting the filling level
You can preset the filling level of the tumbler with the
knob on the base of the water unit (foot end).
Clockwise rotation increases the filling amount.
A
CUP FILL TIMER
HYDROCOLLOID
CUP FILL TIMER
HYDROCOLLOID
