8 Patient positions
Sirona Dental Systems GmbH
8.6 Programming patient positions
Operating Instructions C4
+
59 06 313 D 3382
36
D 3382.201.01.13.02
8.6
Programming patient positions
The four factory-set programs can be reprogrammed in-
dividually by user
A
and user
B
.
•
Programs
1
and
2
•
Entry/exit program
0
•
Mouth rinsing program
S
1.
Move the chair to the desired treatment position
by
pressing the different setting keys (see page 30).
2.
To make the SIROLUX FANTASTIC operation light
switch on or remain off when the chair reaches the
programmed treatment position, you must switch the
lamp ON or OFF now. This setting is then also pro-
grammed.
CAUTION
In order to avoid damage to the dentist and assistant el-
ements and to the chair upholstery, make sure that these
elements do not protrude into the movement range of the
chair.
3.
To save the program settings, press the desired pro-
gram key approx. 3 seconds until an audible signal
sounds and the LED of the corresponding key lights
up.
Programming is completed now.
NOTICE
i
Programming is not possible by activating the program
keys with the foot switch (cursor control). Thus program-
ming errors are avoided.
00
SS
22
11
