Sirona Dental Systems GmbH
8 Patient positions
Operating Instructions C4
+
8.3 MultiMotion headrest
59 06 313 D 3382
D 3382.201.01.13.02
33
Removing the MultiMotion
For certain treatments (e.g. of children) it may be expe-
dient to remove the MultiMotion completely in order to
obtain better access to the patient. The patient's head
will then be supported on the contact surface of the
headrest extension
F
.
To remove the MultiMotion, proceed as follows:
1.
Press release button
C
.
2.
Pull the complete headrest out of the headrest ex-
tension.
3.
Cover the opening of the headrest extension with
cover cap
E
.
4.
If a children's head pad
D
is available, place it on
the headrest extension. The head pad is held mag-
netically.
NOTICE
i
The children's head pad (D) is not included in the scope
of supply, however, is available from your dental dealer.
DANGER
The children's head pad (D) contains a strong mag-
net on its bottom side. This magnet could affect any
cardiac pacemaker located nearby.
Therefore, do not allow patients, users and technical
personnel with a cardiac pacemaker to be located
near this magnet.
Furthermore, direct contact of the head pad with
magnetic cards can lead to data loss.
NOTICE
i
Deposit the removed MultiMotion in a safe place where it
cannot fall onto the floor.
Inserting the MultiMotion
To insert the MultiMotion, proceed as follows:
Check the guide of the removed headrest for con-
tamination. Remove any contamination.
Remove the cover cap
E
.
DANGER
Reinsert the MultiMotion in the guide from above until it
audibly locks in place.
Pull on the headrest again to make sure that it is
locked securely in place.
C
E
D
F