7
Safety
Warning:
To reduce the risk of fire, electric shock, or injury to persons, observe the following:
1.
Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the
manufacturer.
2.
Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting
means to prevent power from being switched on accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
3.
Installation work and electrical wiring must be done by a qualified person(s) in accordance with all
applicable codes and standards, including fire-rated construction.
Warning:
To prevent explosion or fire:
1.
Carefully review the operator’s manual.
2.
Clean under floor, as fines may cause a bin fire.
3.
Do not use to exhaust hazardous or explosive material and vapors.
4.
Disconnect and lock out all power sources before servicing equipment.
Warning:
Keep clear of all moving parts
1.
Keep people (ESPECIALLY YOUTH) away from equipment, particularly during operation.
2.
Keep away from all moving parts. Entanglement can cause serious injury or death.
3.
Keep inlet guard in place and in good working condition.
4.
If fan is wired for suction, outlet must be shielded to protect an individual from moving parts.
Failure to follow the above precautions may cause serious injury or death.
Caution:
To avoid electrocution, all equipment must be properly wired and grounded according to electrical
codes. Have unit wired by a qualified electrician.
Have your electrician install a main power disconnect switch capable of being locked only in the
Off
position.
Mark disconnect clearly as to the equipment it operates. Always
Lock Out
main power disconnect switch
whenever equipment is not in use or when servicing the unit.
