13
Centrifugal Fan Model Installation
1.
Remove existing fan guard.
Also remove hardware where
indicated by the Letter “A”
for mounting of Burner
Assembly. Save 5/16” Fender
Washers and Bolts for future use
2.
Mount “Cent Mnt” (224416) onto
Burner Ass’y (224314) as shown
utilizing ¼”x ¾” Hex bolts (154003)
and ¼” Nylock Nut (157388). Leave
hardware slightly loose for final adjustments.
3.
Mount Assembly from Step 2 to fan housing
in position shown. Utilize washers and bolts
from Step 1. Verify burner is centered over
opening. Finish tightening ¼” hardware from
Step 2 after final adjustments for positioning
of Burner Assembly is made. Note: Assembly
is designed to fit a 26.5” to 35.25” bolt
hole pattern diameter.
