SINO SDS6, Руководство по эксплуатации

Страница: 58 / 117

E
2
. The Function For 200 Point(Be the same with: LATHE)
49
155
40
70
φ
4
0
φ
7
1
φ
6
0
φ
4
0
φ
2
0
25
10
3(20,-130)
2(30,-120) 1(20,-70)
X
O(0,0)
example, Points 1
、
2 and 3 in Fig. (1). It is possible to enter the display mode of
every UCS taking a subsidiary zero position as its original points to perform the
processing when need.
2. In the display mode of every UCS, processing with various special function can
be performed.
Ⅲ
. The setting of subsidiary zero position
There are two methods of setting subsidiary zero position: the one is entering
the position of the subsidiary zero position directly, the other is resetting once a
subsidiary zero position is reached.
Method 1: Directly Entering, under the UCS display mode, key
Number keys .
Take Fig. (1) as example: After turning the machine on, move the machine
tool to the center point O in Fig.(1), Enter the absolute display mode.
Fig. (1)
In the following content take Y axis as an example
Reset, set the zero position in the absolute mode at the main reference of the
working piece.
1) After setting the zero position in the absolute mode, the system automatically
perform a keeping in memory operation, in order that once a power interruption
happen in the course the zero position may be tracked back.
SEL
SEL
Z
Z
0
Y/Z