SINO SDS6, Руководство по эксплуатации, Страница: 55 / 117

E
1
. The Function For 200 Point(Be the same with: MIIL_MS
、
MIIL_M
、
EDM)
46
For PCD function, please refer to the
related sections.
Ⅴ
. The Clearing of Subsidiary Zero Positions and Other
Related Problems.
1. The Clearing of Subsidiary zero positions
In absolute state (ALE state), key 10 times continuously, the memory
about all the subsidiary zero positions will be cleared, the 200 subsidiary zero
positions will become the same point of the zero position in the absolute state.
2. Reset during a subsidiary zero position is being used
A subsidiary zero position is being used of course under the display mode of
the corresponding UCS, resetting in this state is actually to reset a new subsidiary
zero position. The point at which the resetting operation act become the new
subsidiary zero position, and the new subsidiary zero position replacing the
original subsidiary zero position.
3. Turn to one half during a subsidiary zero position is being used
“1/2” function may be used under UCS display mode. Turning to one half
under the UCS display mode using a subsidiary zero position is actually also
resetting a new subsidiary zero position. After the operation of turning to one half
act, the original subsidiary zero position will be replaced by the new subsidiary
zero position is center between the original subsidiary zero position and the point
at which the operation act.