SINO SDS6, Руководство по эксплуатации

Страница: 18 / 117

A. Basic Function
9
origin. (Figure 1)
2. To carry out error compensation taking the 1
st
absolute zero of the raster
ruler as the mechanical origin. (Figure 2)
L: The distance of effective range of raster ruler
L1: Length of the compensation segment
L2: Effective distance of the compensation segment
1. Set up according to the sketch map 1. The parameter set-up method is as
follows:
1) Move the raster ruler to the
smallest end of the coordinate data Enter into the ALE right-angle coordinate
system
2) Press , enter into the input function of multi-segment compensation
of X axis (the set-up method for Y axis and Z axis is the same as X axis.)
3) setting compensation of Segmented error
1.FIND_ZE
(searching for the origin, suiting for having set the compensation of
segmented error)
press switchint to next step
2. SET_SEG
(setting compensation of segmented error)
press
，
next step
Notice
：
be sure to find the origin before setting compensation of segmented