SINO SDS6, Руководство по эксплуатации

Страница: 22 / 117

A. Basic Function
13
L'---the displayed value on digital display meter (mm)
S---the actually factor (mm/m), "+" symbol means the actual length is larger, and
"-" symbol means the actual length is smaller.
Compensation range: -1.500 mm/m
～
+1.500 mm/m
Example: The Actual metered length of the machine tool machine table is
1000 mm, and the display value on the digital display meter is 999.98 mm.
S=(1000-999.98)/(1000/1000)=0.02 mm/m
1) Select the axis
2) Key
modificatory coefficient used
last time
3) Key the new correction factor in:
4) Key
Note: The linear error compensation can only be carried in absolute display
mode (the message screen displays ALE) and metric system
；
12. Power Interruption Memory
During the processing of a working piece, there may occur power interruptions
or needed temporary turnoffs, the digital display box will automatically store the
working state (such as the working mode in every axis, displayed data and the
linear error compensation factor) just before every interruption event in its
memory. Every time when the machine is turn on again, the digital display box
will recover to its working state just before the interruption event after self
checking, and the valve just before the interruption (turn off) event will recover,
and the processing will continue.
13. Sleep Switch (no this function for the digital display box with 3-axis
display)
The switch on the back panel of the digital display box may once be turned
off during the processing of a working piece. It is true that the SDS Series digital
box has its interruption memory, but the machine tool may have been moved after
the event. In such a case, when the machine is turned on again, the working state
just before the interruption event will be displayed again, but this is not the actual
0 0 2