SINO SDS6 Скачать руководство пользователя страница 95

Страница: 95 / 117

L. (EDM) Matching Output Function(Be the same with:

3V-EDM)

4) X-axis will display “target value of personal location”

Y-axis will display “value of depth reached”. Note: Values on Y-axis means the

depths reached on the work piece by processing.

Z-axis will display “real time value of personal location”. Note: Values on

Z-axis mean the values of locations of main axis electrode on Z-axis.

5) Start processing. The displayed value on Z-axis gradually gets close to the

target value. The displayed value on Y-axis also gets close to the target value. If

the electrode is repeated raised and lowered at this time, the displayed value on

Z-axis will change accordingly. But the displayed value on Y-axis will not

change, and always refer to the value of depth reached by processing.

6) When the displayed value on Z-axis is equal to the set target value, the

matching switch is shut off, EDM discharging machine will stop processing,

and message screen will display “EDM. E”. According to the setup of operators,

there are 2 kinds of exit modes:

①

automatic mode: means automatically exit

from the processing status of spark machine, and return to the display status

before such processing;

②

pause mode: “EDM. E” is always displayed, you

have to press the button once to exit and return to the original display

status.

3. Set “ERRHIGH”, exit mode and processing direction:

Before processing, you can first set “ERRHIGH”, “exit mode” and

“processing direction”.

1) Enter “EDM”

Key

2) Enter Setup Mode

Key

SEL

Содержание SDS6






















































































































Результаты поиска

Содержание SDS6

Отзывы:

Бренды по названию

Популярные бренды

SINO SDS6, Руководство по эксплуатации

Результаты поиска

Содержание SDS6

Отзывы:

Бренды по названию

Популярные бренды