SINO SDS6, Руководство по эксплуатации

Страница: 17 / 117

A. Basic Function
8
In the function of Y, Z axis summing, press can switch the display
mode.
1) if the former display mode is summing,
press switch to separate mode.
2) if the former display mode is separation,
press switch to summing mode.
Note: only the lathe machine digital displayer has the function; the parameter
option” whether the Y\Z axis summing display” must be set summing mode;
the Z axis only displays the digital value, and can’t be preset value or clear.
9. "M/I" (The mm System/inch System) Conversion Display.
Key ,the size displayed in the
mm System/inch system will convert
one to the other.
1) The original display is in the mm
system, and the display in inch is
desired.
2) Key
3) Key or choose the bits of decimal;
（
4 bits or 5bits
）
Key
4) Enter processing mode of Hole B
5) Key can convert directly to mm System
10. Segmented error compensation
Note: only in Metric system can do Segmented error compensation . After
Segmented error compensation, the display can be converted freely betweef
Metric system and Imperial system.
There are two methods for Segmented error compensation of the digital
display meter:
1. To carry out error compensation taking the start point as the mechanical
SEL
SEL
SEL
SEL
A
B
2.4"
1"
Y
Z
ALE
ALE
Y
Z
ALE
ALE