SINO SDS6, Руководство по эксплуатации

Страница: 30 / 117

B. Smooth R(Be the same with: MIIL_MS
、
MIIL_M)
21
Key
11) Determine inner/outer circle mode.
Key or
Key
Key
12) It is display that the processing start at
the first point.
Tool setting as Fig. (a)
Tool setting as Fig. (b)
13) Move the machine tool to bring the
display value on X- and Y-axes
into zero, reach the start point of R.
14) Key or and the position of any processing point may come to be
displayed, and you can move the machine tool to bring the displayed values
on the both axes into zero and reach the position of the corresponding point of
the R circular arc.
(
Ⅱ
) *Take the processing of the arc shown in the figure in page 24 as an
example again.
1) At first, finish tool setting, reset, key ,
and enter ARC function.
2)choose smooth function
press
press
（
only 2V readout has this set item and 3V readout has only smooth R function
，
so hasn’t this set item and directly get into next step
）
3) Select processing plane
Key or
SEL
SEL
SEL
SEL
SEL
SEL
SEL
SEL
R