Simrad SP60 - REV D, Руководство по установке

Страница: 139 / 218

Start-up procedures
123
851-164574 / C
Figure 41 Origo
definition
-Y
+Y
+X
-X
Origo
(C
D
67
48
)
4 Press the X Position button and enter the correct value.
5 Press the Y Position button and enter the correct value.
6 Press Close to finish.
7 Select Own Ship on the Installation menu, then Instrument
Position Offsets , and finally GPS .
8 Observe the Instrument Offset Positions menu appear at
the bottom of the menu field.
9 Press the X Position button and enter the correct value.
10 Press the Y Position button and enter the correct value.
11 Press Close to finish.
When a new display mode is selected, the instruments will change
to the chosen positions.