Simrad Simrad SP70, Руководство по установке

Страница: 128 / 230

Simrad SP70
112
851-164336 / D
Checking the sonar room functions
Note
This procedure must be performed simultanously with the
procedure and checklist in the previous chapter;
Checking the
bridge functions .
The instructions marked Bridge: are performed on the bridge.
Note that these procedures are more detailed that what is presented
here.
1 Check that the depth under the keel is sufficient to safely
lower the transducer.
2 Bridge: Start the sonar.
3 Press the black button marked 1 on the motor overload
switch S301 in the Motor Control Unit.
4 Set the hoist / lower switch S302 in the Motor Control Unit
to Remote.
a Notify the bridge to perform the next step.
5 Bridge: Lower the transducer to its middle position.
6 Bridge: Lower the transducer to is lower position.
7 Bridge: Hoist the transducer to its middle position.
8 Bridge: Hoist the transducer to its upper position.
9 Bridge: Lower the transducer to is lower position.
10 Bridge: Hoist the transducer to its upper position.
11 Set the hoisting/lowering switch S302 in the Motor Control
unit to the Stop position.
a Notify the bridge to perform the next step.
12 Bridge: Switch off the sonar.