Simex PL 4520, Руководство по эксплуатации и обслуживанию

Страница: 45 / 60

45
15 Troubleshooting
This section aims to provide the user with solutions to the most commonly experienced problems
(malfunctions). Do not carry out any maintenance or repairs which would effect machine safety.
The remedies marked with the letter D require the intervention of the authorised dealer. The
remedies marked with the letter P require the intervention of qualified personnel. The remedies
marked with the letter O can be carried out by the operator.
FAULT LIKELY CAUSE REMEDY
SLOW PLANING,
LOW
PERFORMANCE
TEETH TIPS WORN OR BROKEN REPLACE THE TOOLS AND CLEAN THEIR SEATS
O
LOW FLOW AND/OR HYDRAULIC
PRESSURE
MAKE SURE ALL THE CONNECTIONS REQUIRED TO
ENSURE CORRECT OPERATION WITH THE PLANER
ATTACHED HAVE BEEN MADE PROPERLY.
CONTACT THE PRIME MOVER’S SERVICE
DEPARTMENT, AS THE FLOW AND HYDRAULIC
PRESSURE DEPEND ON THE PRIME MOVER.
D
VIBRATIONS
LOOSE OR MISSING SCREWS/BOLTS
CHECK THE TIGHTENING TORQUES OF THE
SCREWS/ BOLTS (DRUM, HYDRAULIC MOTOR, ETC)
REPLACE THE MISSING SCREWS/BOLTS.
P
WORN OR MISSING TOOLS REPLACE THE TOOLS AND CLEAN THEIR SEATS
O
CUTTER HYDRAULIC
MOTOR NOISY OR
JAMMED
PROBLEMS INSIDE THE MOTOR
CONTACT AN AUTHORISED SIMEX SERVICE
CENTRE
D
PLANER DOES NOT
TURN
NO HYDRAULIC FLOW AND/OR PRESSURE CHECK THE PRIME MOVER’S HYDRAULIC SYSTEM
P
QUICK COUPLINGS NOT FITTED
PROPERLY
FIT QUICK COUPLINGS PROPERLY
DRUM START SWITCH IN “OFF” POSITION
(WHERE FEATURED)
SWITCH TO “ON”
O
OTHER HYDRAULIC OR ELECTRIC
PROBLEMS
CONTACT AN AUTHORISED SIMEX SERVICE
CENTRE
D
THE SIDE SHIFT
DOES NOT
OPERATE
POWER CABLE DISCONNECTED CONNECT THE POWER CABLE
O
QUICK COUPLINGS NOT FITTED
PROPERLY
FIT QUICK COUPLINGS PROPERLY
O