Simex PL 4520, Руководство по эксплуатации и обслуживанию

Страница: 50 / 60

50
16.4 Hydraulic tilt adjustment
On request, the hydraulic tilt adjustment can be operated via the jack shown in fig. 2.
The jack (fig. 2) that controls the tilt angle is operated using the controls on the panel in figure 1:
For the machines featuring 3 hydraulic lines:
- deactivate the drum by flipping the switch (ref. “A” in the figure), to OFF and check that the red LED is off
(ref. “B” in the figure);
- turn selector dial C to the tilt adjustment symbol (as shown in fig. 1);
- switch on the oil pressure using the controls on the prime mover;
- flip switch D to the right or the left to open or close the cylinder (fig. 2) and set the desired tilt angle (max 8°
to the right or left). See the sticker in fig. 7 para. 9.10 to check the tilt degree.
Every 50 work hours, grease using
the greasing nipples shown
opposite.
N.B.
There is also a hydraulic floating tilt version available on request. The operator can activate the
function using an additional control located on the control panel.