Simex PL 4520, Руководство по эксплуатации и обслуживанию

Страница: 19 / 60

19
9 Use
The fitter is responsible for checking that the prime mover meets the equipment’s
specifications (see section 6.3).
The machine may only be fitted on prime movers carrying a declaration of
conformity to directive 98/37/EC and or 2006/42/EC (e.g. those fitted with dead-man’s
controls, which disable the machine’s controls when, for example, there is no-one in
the driving seat, etc).
9.1 Preliminary checks
Before proceeding with the connection to the machine, the prime mover must undergo checks to ensure:
A. that all the featured safety devices work properly;
B. that all the quick couplings and other components related to the coupling to the prime mover
are in good condition.
9.2 Procedure for getting on and off the prime mover
(for self-levelling planers applied to skid loaders where the driver’s seat is accessed from the
front of the p.m.)
GETTING ON (on the right-hand side of the machine).
A= place your left foot on the lower step on the self-levelling planer (fig. 1);
B= with your weight on your left foot, step up onto the self-levelling planer, placing your right foot on the upper
step (fig. 2);
C= with your weight on your right foot, step up onto the prime mover, placing your left foot on the non-slip step
(fig. 3).
To
GET OFF , carry out the steps outlined in figures 1, 2 and 3 in reverse order.
If the lower step is fitted on the left-hand side of the machine, the procedures to get
on and off must be carried out as outlined above but using the opposite foot to that
specified for each movement.
When getting on and off the prime mover, always use the non-slip steps.
Make sure your shoes are not muddy or covered with anything else that could make you
slip.
On no account should you get off or on from the front of the machine.