Simex PL 4520, Руководство по эксплуатации и обслуживанию

Страница: 52 / 60

52
The jacks (fig. 3) that control the planing depth, are activated using a combination of the control located on the
panel in figure 2 and the control located in the prime mover (the second auxiliary device control).
For the machines featuring 5 hydraulic lines.
- Depending on the jack required, keep
button C pushed either to the right or the
left, activating the prime mover control at
the same time to open or close the
selected jack. Set the desired depth by
referring to the sticker on the jack itself.
Key:
Martinetto sinistro = LH jack
Martinetto destroy = RH jack
Every 50 work hours, grease using
the greasing nipples shown
opposite (on the two cylinders).
Key:
Martinetto sinistro = Left jack
Martinetto destro = Right jack