Simex PL 4520, Руководство по эксплуатации и обслуживанию

Страница: 49 / 60

49
16.3 Misting unit
This unit allows a water mist to be directed at the area where the cutter drum is in use, offering significant dust
abatement.
Where there is a Simex electrical system featured, with an electrical panel fitted in the p.m. cab, switch A on
the panel shown in fig. 1 (located inside the prime mover) allows operation of the electric pump for the forced
mist to be directed at the cutter drum. Signal light B shows when the pump is running.
For the machines without the electrical panel (those with 5 hydraulic lines in the standard versions), operate
the control that the dealer has installed in the skid steer loader cab. The water container can be located either
on top of the prime mover cab (fig. 3) or built into the self-levelling planer’s side shift (fig. 2).