Simex MultiCon CMC-99/141, Руководство пользователя

Страница: 145 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
– Shape parameter set as slope ,
– in the Final value parameter write 10 ,
◦ press the green button at the bottom left side of the screen,
◦ Section num. parameter should be set as 2 ,
– in the
Duration
parameter write
2
,
–
Unit
parameter set as
second
,
–
Shape
parameter set as
const.value
,
– in the Final value parameter write 8 ,
◦ press the green button at the bottom left side of the screen,
◦ Section num. parameter should be set as 3 ,
– in the
Duration
parameter write
3
,
–
Unit
parameter set as
second
,
–
Shape
parameter set as
slope
,
– in the Final value parameter write 4 ,
◦ press the green button at the bottom left side of the screen,
◦ Section num. parameter should be set as 4 ,
– in the Duration parameter write 1 ,
–
Unit
parameter set as
second
,
–
Shape
parameter set as
const.value
,
– in the Final value parameter write 4 ,
• Looping parameter set as disabled ,
– for Displaying block parameters:
•
Format
parameter set as
numeric
,
•
Precision
parameter set as
0.0
,
• in
Graph low
write
0
,
• in Graph high write 10 ,
Configuration of logical channel 2 (Triggering source) in the Hardware input mode for
the current input is shown in 7.8.11.1. Application of the Logical channel in the
Hardware input mode for the UI4 module
(for this mode we configure logical channel 2 in
this task).
Another method is shown in 7.12.4.1. Application of the Profiles/timers .
145