User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Explanation of the symbols used in the manual:
- This symbol denotes especially important guidelines concerning the installation and
operation of the device. Not complying with the guidelines denoted by this symbol
may cause an accident, damage or equipment destruction.
IF THE DEVICE IS NOT USED ACCORDING TO THE MANUAL, THE USER IS HELD
RESPONSIBLE IN ACCORDANCE WITH THIS MANUAL FOR POSSIBLE DAMAGE.
- This symbol denotes especially important characteristics of the unit.
Read any information regarding this symbol carefully
1.
BASIC REQUIREMENTS AND USER SAFETY
- The manufacturer is not responsible for any damage caused by inappropriate
installation, not maintaining the proper environmental conditions and using the
unit contrary to its assignment.
- Installation must be performed by qualified personnel . During installation all
available safety requirements must be considered. The fitter is responsible for
executing the installation in accordance with this manual, local safety and EMC
regulations.
- Protective conductor terminal of the device must be connected to an external
protective earthing system .
- The unit must be properly set-up, according to the application. Incorrect
configuration may cause defective operation, which can lead to unit damage or
an accident.
-
In case of a unit malfunction there is a risk of a serious threat to the safety
of people or property additional. Independent systems and solutions to
prevent such a threat must be used.
-
The unit uses dangerous voltage that can cause a lethal accident. The
unit must be switched off and disconnected from the power supply prior to
starting installation of troubleshooting (in case of malfunction).
- Neighbouring and connected equipment must meet appropriate standards and
regulations concerning safety and be equipped with adequate overvoltage and
interference filters.
- Do not attempt to disassemble, repair or modify the unit yourself. The unit has
no user serviceable parts. Defective units must be disconnected and submitted
for repairs at an authorized service centre.
- In order to minimize a fire or electric shock hazard, the unit must be protected
against atmospheric precipitation and excessive humidity.
- Do not use the unit in areas threatened with excessive shocks, vibrations, dust,
humidity, corrosive gasses and oils.
- Do not use the unit in areas where there is a risk of explosions.
5
i
!
!
!
