A N 5 4 3
208
Rev. 0.9
RESP
Bit
Name
Function
1
7:4
Reserved
Values may vary.
1
3
SNRHINT
SNR Detect High
0 = Received SNR has not exceeded above SNR
programmed using AM_RSQ_SNR_HIGH_THRESHOLD.
1 = Received SNR has exceeded above SNR threshold
programmed using AM_RSQ_SNR_HIGH_THRESHOLD.
1
2
SNRLINT
SNR Detect Low
0 = Received SNR has not fallen below SNR threshold
programmed using AM_RSQ_SNR_LOW_THRESHOLD.
1 = Received SNR has fallen below SNR threshold
programmed using AM_RSQ_SNR_LOW_THRESHOLD.
1
1
RSSIHINT
RSSI Detect High
0 = RSSI has not exceeded above RSSI threshold
programmed using AM_RSQ_RSSI_HIGH_THRESHOLD.
1 = RSSI has exceeded above RSSI threshold programmed
using AM_RSQ_RSSI_HIGH_THRESHOLD.
1
0
RSSILINT
RSSI Detect Low
0 = RSSI has not fallen below RSSI threshold. programmed
using AM_RSQ_RSSI_LOW_THRESHOLD.
1 = RSSI has fallen below RSSI threshold programmed
using AM_RSQ_RSSI_LOW_THRESHOLD.
2
7
BLTF
Band Limit
Reports if a seek hit the band limit (WRAP = 0 in AM_-
SEEK_START) or wrapped to the original frequency
(WRAP = 1).
2
6
Reserved
Values may vary.
2
5
SNRREADY
SNR Status
When set, indicates that the SNR metric was read as part of a
tune. If this flag is not set once tune completes, the SNR met-
ric was not measured. A metric not measured indicates that a
tune was terminated prematurely due to an invalidating condi-
tion (i.e., RSSI did not meet the minimum threshold).In this
case, tune time RSQ will report 0 for SNR. The normal run-
ning SNR is not affected by this flag.
0 = SNR measurement in progress (tune in progress).
1 = SNR measurement ready or not taken (tune completed).
2
4
RSSIREADY
RSSI Status
When set, indicates that the RSSI metric was read as part of
a tune. If this flag is not set once tune completes, the RSSI
metric was not measured. In this case, tune time RSQ will
report 0 for RSSI. The normal running RSSI is not affected by
this flag.
0 = RSSI measurement in progress (tune in progress).
1 = RSSI measurement ready or not taken (tune completed).
