AN543
Rev. 0.9
227
Property 0x070C AM_RF_AGC_ATTACK_MS
The AM_RF_AGC_ATTACK_MS property sets the number of milliseconds the wideband RF high-peak detector
must be exceeded before attenuating the appropriate block. The peak detectors are only sampled once every 3–
5 ms. If the peak detector trips, the internal counter is incremented by 4 ms. The CTS bit (and optional interrupt) is
set when it is safe to send the next command. This property may only be set or read in powerup mode.
Default: 8
Units: ms
AM_RF_AGC_ATTACK_MS
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RF_AGC_ATTACK_MS[15:0]
0x0008
Bit
Name
Function
15:0
RF_AGC_ATTACK_MS[15:0]
Number of milliseconds the wide-band RF high-peak detec-
tor must be exceeded before attenuating the appropriate
block. Default is 8 ms.
Si475x-A10 and earlier: Range: 4–248 ms.
Si475x-A20 and later: Range: 4–4096 ms.
