Silicon Graphics InfiniteStorage 4000 Series, Настройка и обслуживание, Страница: 38 / 276

26 Synopsis of the Script Commands
check object

{ statement-data }
Starts an operation to report on errors in the object,
which is a synchronous operation.
clear object

{ statement-data }
Discards the contents of some attributes of an object.
This operation is destructive and cannot be reversed.
create object

{ statement-data }
Creates an object of the specified type.
deactivate object

{ statement-data }
Removes the environment for an operation.
delete object
Deletes a previously created object.
diagnose object

{ statement-data }
Runs a test and shows the results.
disable object
{ statement-data }
Prevents a feature from operating.
download object

{ statement-data }
Transfers data to the storage array or to the hardware
that is associated with the storage array.
enable object

{ statement-data }
Sets a feature to operate.
load object

{ statement-data }
Transfers data to the storage array or to the hardware
that is associated with the storage array. This command
is functionally similar to the
download
command.
recopy object

{ statement-data }
Restarts a volume copy operation by using an existing
volume copy pair. You can change the parameters before
the operation is restarted.
recover object

{ statement-data }
Re-creates an object from saved configuration data and
the statement parameters. (This command is similar to
the
create
command.)
recreate object

{ statement-data }
Restarts a snapshot (legacy) operation by using an
existing snapshot (legacy) volume. You can change the
parameters before the operation is restarted.
remove object

{ statement-data }
Removes a relationship from between objects.
repair object

{ statement-data }
Repairs errors found by the
check
command.
replace object

{ statement-data }
The specified object replaces an existing object in the
storage array.
reset object

{ statement-data }
Returns the hardware or an object to an initial state.
Syntax Description