Silicon Graphics InfiniteStorage 4000 Series, Настройка и обслуживание

Страница: 175 / 276

Chapter 9: Using the Volume Copy Premium Feature 163
To view the progress of a volume copy, use the
show volume
actionProgress
command. This command returns information about the volume
action, the percentage completed, and the time remaining until the volume copy is
complete.
Viewing Volume
Copy Properties Use the
show volumeCopy
command to view information about one or more
selected source volumes or target volumes. This command returns these values:

The role

The copy status

The start time stamp

The completion time stamp

The copy priority

The Read-Only attribute setting for the target volume

The source volume World Wide Identifier (WWID) or the target volume WWID
If a volume is participating in more than one volume copy (it can be a source volume
for one volume copy operation and a target volume for another volume copy
operation), the details are repeated for each associated copy pair.
The command has this form:
show volumeCopy (allVolumes | source [ sourceName ] |

target [ targetName ])
This example shows the
show volumeCopy
command:
c:\...\sm X \client>smcli 123.45.67.88 123.45.67.89

-c “show volumeCopy source [\”JabaHut\”];”
The command in this example is requesting information about the source volume
Jaba_Hut. If you wanted information about all of the volumes, you would use the
allVolumes
parameter. You can also request information about a specific target
volume.
This example shows how to use the command in a script file:
show volumeCopy source [“Jaba_Hut”];
Changing
Volume Copy
Settings The
set volumeCopy
command lets you change these property settings for a
volume copy pair:

The copy priority

The target volume read/write permission