Silicon Graphics InfiniteStorage 4000 Series Скачать руководство пользователя страница 24

Страница: 24 / 276

AutoSupport Bundle Collection Commands

ASUP Log

The ASUP log file has a detailed list of events encountered during delivery of the

ASUP messages. The ASUP log provides information about status, history of

transmission activity, and any errors encountered during delivery of the ASUP

messages. The log file is available for all ASUP-enabled storage arrays.
The archived log filename is

ASUPMessages.n

, where

is an integer from 1 to 5.

The log file is located in the

ASUPLog

directory. As the current log file reaches a size

limit of 200 KB, the current log file is archived and a new log file is created.

Disable
AutoSupport at the
EMW Level SMcli
Version

NOTE

This command is an SMcli command, not a script command. You must run this

command from a command line. You cannot run this command from the script editor

in the storage management software.

This command turns off the AutoSupport (ASUP) bundle collection feature for all

managed storage arrays.

Syntax

SMcli disable autoSupportFeature

Parameters

None.

Minimum Firmware Level

7.86

Enable AutoSupport
at the EMW Level
SMcli Version

NOTE

This command is an SMcli command, not a script command. You must run this

command from a command line. You cannot run this command from the script editor

in the storage management software.

This command turns on the AutoSupport (ASUP) bundle collection feature for all

managed storage array and makes it possible to transmit the bundle to a predesignated

technical support site. After you enable the ASUP feature, any ASUP capable storage

array is automatically prepared to collect and send support related data to Technical

Support. The data can then be used for remote troubleshooting and problem analysis.

Syntax

SMcli enable autoSupportFeature

Parameters

None.

Minimum Firmware Level

7.86

Содержание InfiniteStorage 4000 Series




















































































































































































































































































Результаты поиска

Содержание InfiniteStorage 4000 Series

Отзывы:

Похожие инструкции для InfiniteStorage 4000 Series

Бренды по названию

Популярные бренды

Silicon Graphics InfiniteStorage 4000 Series, Настройка и обслуживание

Результаты поиска

Содержание InfiniteStorage 4000 Series

Отзывы:

Похожие инструкции для InfiniteStorage 4000 Series

Бренды по названию

Популярные бренды