Silicon Graphics InfiniteStorage 4000 Series, Настройка и обслуживание

Страница: 67 / 276

Chapter 4: Configuring a Storage Array 55
 show storageArray dbmDatabase
 show storageArray hostTopology
 show storageArray iscsiNegotiationDefaults
 show storageArray lunMappings
 show storageArray unconfiguredIscsiInitiators
 show storageArray unreadableSectors
 show string
 show thinVolume
 show allVolumes
 show volume
 show volume actionProgress
 show volumeCopy
 show volumeCopy sourceCandidates
 show volumeCopy targetCandidates
 show volumeGroup
 show volumeGroup exportDependencies
 show volumeGroup importDependencies
 show volume performanceStat
 show volume reservations
Clearing the
Configuration If you want to create a completely new configuration on a storage array that already
has an existing configuration, use the
clear storageArray configuration
command. This command deletes all of the existing configuration information,
including all of the volume groups, disk pools, volumes, and hot spare definitions
from the controller memory.
ATTENTION Possible damage to the storage array configuration
– As soon as
you run this command, the existing storage array configuration is deleted.
The command has this form:
c:\...\sm X \client>smcli 123.45.67.88 123.45.67.89

-c “clear storageArray configuration;”
This command has two parameters that you can use to limit the amount of
configuration information removed:
 all
– Removes the entire configuration of the storage array, including security
information and identification information. Removing all of the configuration
information returns the storage array to its initial state.