AG03/1
Transport, Storage, Maintenance and Disposal English
AG03/1 · Date
23.07.2019 · Art.
No.
86426 · Mod.
status
179/19
45
Mounting (see
1. Axially click new battery
18
into holder
19
.
2. Check the correct position of the O-ring
16
überprüfen. O-ring lie
completely in the groove destined for this purpose.
3. Mounting the cover
15
incl. the plugged screws
14
with loss protec-
tion
21
and light guide
20
. Carefully insert the light guide into the
holes provided in the housing.
6.4 Malfunction after replacing the battery
When changing the battery, the battery undervoltage may occur. You
can acknowledge this error by switching supply voltage off and on. Alter-
nately, you can also acknowledge the error via the bus.
For more detailed information on acknowledging error via the bus refer to
the manual.
7 Transport, Storage, Maintenance and Disposal
Transport and storage
Handle, transport and store actuators with care. Pay attention to the fol-
lowing points:
•
Transport and / or store actuators in the unopened original packag-
ing.
•
Protect actuators from harmful physical influences including dust,
heat and humidity.
•
Do not damage connections through mechanical or thermal impact.
•
Prior to installation inspect the actuator for transport damages. Do
not install damaged actuators.
Maintenance
With correct installation according to chapter
the actuator requires no
maintenance. The actuator has received lifetime lubrication and need not
be lubricated under normal operating conditions.
Disposal
The actuator's electronic components contain materials that are harmful
for the environment and are carriers of recyclable materials at the same
time. Therefore, the actuator must be recycled after it has been taken out
of operation ultimately. Observe the environment protection guidelines of
your country.
