SIGRIST StackGuard 2, Инструкция по эксплуатации

Страница: 52 / 62

Instruction Manual StackGuard 2 System
46 10198E/3
8 Packing/Transport
Whenever possible, use the original packing materials when packing the
photometer and its peripherals for shipment. If the materials are no longer
available, observe these instructions:
 Prior to packing, close all openings of the photometer with pressure-
sensitive tape or plugs to prevent any packing materials from penetrating
them.

The photometer contains optical and electronic components. Pack the
instrument in such a way that it is protected against impact and blows
during shipment.
 Pack all of the peripheral devices and accessories separately, and mark
each part with the serial number (
 Section 1.4). This will prevent mixups
later on and facilitate identification of the parts.
Packed this way, the photometer can be shipped by any normal mode of
transport and in any position.