SIGRIST StackGuard 2, Инструкция по эксплуатации

Страница: 18 / 62

Instruction Manual StackGuard 2 System
12 10198E/3
Action Remarks
1. Remove protective cover (A) of the control unit.
2. Loosen fastening screws (B) and swing down
the hinged frame (C).
Connection of the measured data outputs
can be done without swinging down the
hinged frame (C).
Figure 8: Large terminals.
The large terminals are designed for mains
voltage and can accommodate wires up to
2.5 mm
2 cross-section (without ferrules).
Open the terminals with a size 1
screwdriver!
Access to relay
outputs and
measured data
outputs
Terminal principles
A