SIGRIST StackGuard 2, Инструкция по эксплуатации

Страница: 31 / 62

Instruction Manual StackGuard 2 System
10198E/3 25
Action Display Remarks
6.  /  Change
number

/

Change
menu point
Limit
> 1 < Limit monitor
(active "1", inactive "0")
Prio Fault Warn.
> 0 0 0 < Active in the case of:
- prio fault
- fault
- warning
(active "1", inactive "0")
Serv. Check
> 0 0 <
Active when:
- instrument in service mode
- sensor check running
(active "1", inactive "0")
Dig.input
> 1 _ < Active when:
- signal at control input 1
- signal at control input 2
(active -> number; inactive
"_")
Inversed
> 0 < Invert relay function
(active "1", inactive “0")
7.

Relay N
>LI al se DI in< Select additional function
(point 5) or terminate with
point 8
8.

> Relay N <
LI al se DI in Confirm selection
9.

> Upper limit <
1.000 PLA The limit is monitored only
when the limit function is
activated for the relay in
question
10.

Upper limit
> 1.000 PLA < Activate editing mode
11.

/

Change
number

/

Change
place
Upper limit
> 2.000 PLA < Set upper threshold
12.  > Upper limit <
2.000 PLA Confirm entry
13.

> Lower limit <
0.900 PLA
14.

Lower limit
> 0.900 PLA < Activate editing mode
15.

/

Change
number

/

Change
place
Lower limit
> 1.800 PLA < Set lower threshold