SIGRIST ColorPlus 3, Инструкция по эксплуатации

Страница: 67 / 80

Troubleshooting Instruction Manual ColorPlus 3
14501E/2 67
10 Troubleshooting
10.1 Pinpointing faults
DETECTABLE FAULT MEASURE
No reading

Check whether the supply voltage is connected.

Check whether the mains plug is connected.

Check whether the instrument is switched on.
Fault message in the display

Analyze the fault message according to Section
10.1.2.
The reading appears to be
wrong

Ensure that the sample to be measured corresponds
to the operating conditions. Section 2.4

Carry out recalibration. Section 9.4

Check whether the instrument is correctly mounted.
Section 4

Ensure that the servicing duties have been performed
according to the servicing schedule. Section 9.1
Table 2: Pinpointing malfunctions
If the listed measures do not lead to the desired results, please consult customer service. Sec-
tion 11
10.1.1 Warning messages and effect on operation
Warnings indicate an unusual state.
WARNINGS
If a warning occurs during operation, it has the follow-
ing effects:

The system continues to operate. However, the
measuring results must be evaluated with caution.
The cause of the warning message should be rem-
edied at the next possible opportunity.

When the cause of the warning has been reme-
died, it is automatically deleted.

When the Warning message occurs, the color of
the status display changes to orange and the
warning text describes the warning in question.
Example: WARNING CURRENT 1