Instruction Manual ColorPlus 3
General safety points
18
14501E/2
CAUTION!
Eye injuries caused by UV radiation.
During operation, there is dangerous UV radiation that can cause eye damage.
Always interrupt the service voltage before opening the instrument.
Never look directly into the light beam.
Do not use any reflective objects when cleaning the measuring cell.
CAUTION!
Penetration of moisture as well as condensation on the electrical components dur-
ing servicing duty.
If moisture enters the instrument, the ColorPlus 3 can be damaged.
Work inside the instrument may be performed only in a dry room and at room tempera-
ture. The instrument should be at operating or room temperature (avoid condensation
on optical and electrical surfaces).
CAUTION!
The use of aggressive chemicals when cleaning.
Use of aggressive chemicals can cause damage to instrument components.
Do not use aggressive chemicals or cleaning agents when cleaning.
Should the instrument come in contact with aggressive chemicals, clean it thoroughly
with a neutral cleaning agent.
3.2
Residual risk
WARNING!
According to the risk assessment of the applied safety directive DIN EN 61010-1,
there remains the risk of the displayed measuring values being incorrect. This risk
can be reduced with the following measures:
Use an access code to prevent unauthorized persons from changing parameters.
Perform the specified servicing duties.
3.3
Warning and danger symbols on the instrument
WARNING!
There are no warning or danger symbols on the instrument.
Users must ensure that they observe the safety measures as specified in the Instruction Man-
ual at all times when working with the instrument and its peripheral equipment, even if no
warning or danger symbols are attached to the instrument.
The following sections must be internalized:
Section 1.11
Section 1.12
Section 1.13
Section 3.1
Section 3.2
Observe safety pointers when performing the described procedures.
Observe local safety pointers.
