Instruction Manual AquaScat S
Servicing
84
13798E/3
WORKSTEP
ADDITIONAL INFO / IMAGES
7.
Remove the junction hose (Figure 34, pos. 8)
from the coupling on the changeover valve.
The junction hose can be removed by applying
pressure to the sleeve (arrow) on the hose
coupling.
8.
Loosen the Tri-Clamp (Figure 34, pos. 7) and
pull out the probe (arrow).
9.
Carry out the servicing duties on the
AquaScat S.
Clean the AquaScat S according to the Instruc-
tion Manual or carry out a recalibration.
Proceed as follows to replace the desiccant:
1.
Note down which marking (I, II, III) on the
handle is aligned to the marking on the
probe (blue arrow).
2.
Remove the handle by loosening the
screw (X).
3.
Pull out the cover and replace the desic-
cant (Y) (bottom figure).
4.
Reattach the cover immediately.
5.
Align the marking I, II or III to the blue ar-
row on the probe according to your notes,
then tighten the screw (X).