SIGRIST AquaScat S, Инструкция по эксплуатации, Страница: 83 / 108

Servicing Instruction Manual AquaScat S
13798E/3 83
The AquaScat S can be removed from the extractable assembly and reinserted as follows:
WORKSTEP ADDITIONAL INFO / IMAGES
1. Ensure that the handle of the changeover valve
(Figure 34, pos. 6) is pointing downwards.
2. Loosen the two hex bolts (arrows).
3. Rotate the handle (Figure 34, pos. 1) counter-
clockwise up to the stop (arrow).
4.
Danger due to extending pistons.
Do not stand in front of the extractable as-
sembly. Otherwise, injuries can occur.
Stand to the right of the extractable assembly
and rotate the changeover valve (Figure 34,
pos. 6) counter-clockwise so it points to the
right (arrow).
5. The AquaScat S moves out automatically into
the servicing position.
If this is not the case, pull the probe
out by hand using the handle.
6. Close the shut-off valve (Figure 34, pos. 3) (ar-
row).