3 0
MAINTENANCE
6
Rinse inside the froth adj ustment dial seat and
the milk frother connector hole using running
w ater.
7
Check as w ell that the intake tube and spout are
not clogged w ith milk residues.
8
Replace the dial, lining up the arrow w ith the
w ord INSERT, the spout and milk intake tube.
9
Place the milk container in the thermal casing.
1 0
Place the lid back on the milk container.
C l e a n i n g t h e h o t w a t e r / s t e a m
c o n n e c t i o n n o zzl e
Each time you prepare milk, clean the connection
nozzle w ith a sponge to remove milk residues
deposited on the seals.
D e s c a l i n g
C AU TION
•
Before use, read the instructions and the
labelling on the de-scaler packaging.
•
You should use de-scaler authorised by the
manufacturer only. Using unsuitable de-
scaler and/or performing de-scaling incorrectly
may result in faults not covered by the
manufacturer' s guarantee.
De-scale the appliance w hen the display show s
message DESCALING NEEDED PRESS OK TO
START (~45 min)
: to de-scale immediately, press
and follow the instructions from point 4.
To postpone de-scaling to another time, press
: on the display the symbol is a reminder that the
appliance needs to be de-scaled(the message w ill be
re-proposed every time the machine is sw itched on).
To a c c e s s t h e d e - s c a l i n g m e n u :
1
Press to enter the menu;
2
Press or until the display show s DESCALE;
3
Press to start the de-scaling cycle then follow
the instructions on the display;
4
REMOVE WATER FILTER : extract the w ater
tank, remove the w ater softener filter (if present)
and empty the w ater tank. Press
.
5
ADD DESCALER (UP TO LEVEL A) AND
WATER (UP TO LEVEL B). Pour the de-scaler
into the tank up to the level A marked inside the
tank (equal to one 100 ml pack); then add w ater
(one litre) up to level B and put the w ater tank
back in. Press
.
6
EMPTY GROUND CONTAINER AND DRIP
TRAY : remove, empty and replace the drip tray
and the ground container. Press
.