3 2
MAINTENANCE
P r o g r a m m i n g W a t e r H a r d n e s s
The DESCALING NEEDED - PRESS OK TO START
(~45 min)
message is displayed after a period of
time established according to w ater hardness.
The appliance default is pre-set in manufacturing at
" level 4" hardness.
The machine can also be programmed according
to the hardness of the mains w ater in the various
regions so that the machine needs to be de-scaled
less often.
M e a s u r i n g w a t e r h a r d n e s s
1
Remove the " Total hardness test" indicator paper
provided from its packaging, attached to the
instructions.
2
Immerse the paper completely in a glass of
w ater for about one second.
3
Remove the paper from the w ater and shake
lightly. After about a minute, 1, 2, 3, or 4 red
squares form, depending on the hardness of the
w ater. Each square corresponds to one level.
soft w ater - level. 1
slightly hard w ater - level. 2
hard w ater - level. 3
very hard w ater - level. 4
S e t t i n g w a t e r h a r d n e s s
1
Press to enter the menu;
2
Press or until the display displays WATER
HARDNESS.
3
To change the level selected, press the symbol
itself until the required level is displayed
(Level 1 = soft w ater; Level 4 = very hard w ater).
Press
to go back to the homepage.
The machine is now reprogrammed w ith the new
w ater hardness setting.
W a t e r S o f t e n e r F i l t e r
Some models are fitted w ith a w ater softener filter : if
your model is not equipped w ith one, w e recommend
buying one through an authorised customer service
centre.
To use the filter correctly, follow the instructions
below .
Installin t e filter
1
Remove the filter from the packaging.
2
Press to enter the menu.
3
Press or until the display show s WATER
FILTER.
4
Press .
5
TURN THE DATE INDICATOR UNTIL THE
NEXT 2 MONTHS ARE DISPLAYED:
turn the date indicator disk until the next tw o
months of use are displayed.
Press
.