1 5
OPERATION
ENG
LIS
H
M e n u S e t t i n g s
R i n s i n g
Use this function to supply hot w ater from the coffee
spouts to clean and heat the appliance’s internal
circuit. Place a container w ith a minimum capacity of
100 ml under the coffee and hot w ater spouts.
To e n a b l e t h e f u n c t i o n , p r o c e e d a s f o l l o w s :
1
Press to enter the menu;
2
Press or until the display show s RINSING;
3
Press to start rinsing.
C AU TION
Do not leave the appliance unattended w hile hot
w ater is being delivered.
1
After a few seconds, hot w ater comes out of
the coffee spout w hich cleans and heats the
internal circuit of the appliance: the follow ing
message is show n on the display RINSING
HOT WATER RUNNING as w ell as a
progress bar w hich fills up as the preparation
progresses;
2
To stop the rinsing cycle, press
or
w ait for rinsing to stop automatically.
NOTE
•
If the appliance is not used for more than 3-4
days, w hen sw itched on again, w e strongly
recommend doing
2
/
3
rinses before use;
•
After rinsing, it is normal that there is some
w ater in the grounds container.
D e - s c a l i n g
For instructions on de-scaling, see section “De-
scaling”.
ater filter
For instructions on how to install the filter, see section
“Water softener filter”.
B e v e r a g e s e t t i n g s
In this section, you can consult your customised
settings and, if you w ish, reset the default values for
each beverage.
1
Press to enter the menu;
2
Press or until DRINKS SETTINGS appears
on the display.
3
Press : The values for the first beverage
appear on the display;
4
The reference user profile is highlighted on the
display. The values are show n on the vertical
bars: the manufacturer default value is indicated
by the symbol
w hile the current set value is
highlighted by the filled part of the vertical bar;
5
To go back to the settings menu, press
.
To scroll and display the beverages, press
;
6
To return to the default manufacturer values
for the beverage show n on the display, press
RESET
.
7
CONFIRM RESET?: to confirm, press
(to
cancel, press
).
8
RETURN TO FACTORY: press
.
The beverage has been reset to the default values.
Continue w ith the other beverages, or go back to the
settings menu.
NOTE
•
To change the beverages for another profile,
go back to the homepage, select the required
profile and repeat the procedure.
•
To reset all the beverages in the profile to the
default values, see paragraph “Manufacturer
Default values”.