2 1
OPERATION
ENG
LIS
H
M a k i n g m i l k - b a s e d h o t d r i n k s
NOTE
To avoid milk w ith little froth or large bubbles,
alw ays clean the milk container lid and hot w ater
connection nozzle as described in sections
“Cleaning the milk container after use”, “Cleaning
the milk container” and “Cleaning the hot w ater/
steam connection nozzle”.
F i l l i n g a n d a t t a c h i n g t h e m i l k
c o n t a i n e r
1
Remove the lid.
2
Fill the milk container w ith a sufficient quantity
of milk, not exceeding the MAX level marked
on the container. Each mark on the side of the
container corresponds to about 100 ml of milk;
NOTE
•
For a denser and more even froth, you must
use skimmed or partially skimmed milk at
refrigerator temperature (about 5°C).
•
If " Energy Saving" mode is enabled, there may
be a few seconds delay before the beverage is
delivered.
1
Make sure the milk intake tube is correctly
inserted in the bottom of the milk container
lid.
2
Place the lid back on the milk container.
3
Remove the hot w ater/steam spout.
NOTE
4
By pushing the bottom attach the milk
container to the nozzle. The machine w ill let
out a noise signal (if the sound notification
function is enabled).
5
Place a sufficiently large cup under the
coffee spouts and frothed milk spout. Adj ust
the length of the milk spout, to move it nearer
to the cup, simply pulling it dow nw ards.
6
Follow the instructions below for each
function.
