Siemens SITRANS L Скачать руководство пользователя страница 24

Страница: 24 / 269

Installing/mounting

4.2 Installation location requirements

SITRANS LR250 with FOUNDATION FIELDBUS

Operating Instructions, 09/2021, A5E32221411-AH

4.2

Installation location requirements

WARNING

Aggressive atmospheres

Danger to personnel, system and environment can result from unsuitable environment.
•

Provide an environment suitable to the housing rating and materials of construction.

NOTICE
Direct sunlight

Damage to device.
The device can overheat or materials become brittle due to UV exposure.
•

Protect the device from direct sunlight.

•

Make sure that the maximum permissible ambient temperature is not exceeded. Refer to

the information in Environmental (Page 182).

①

Ambient temperature

②

Device nameplate

③

Device tag

④

Process temperature (at process connection)

⑤

Process connection tag (contains process connection related information)

Antenna

①

④

Horn

-40 to +80 °C

(-40 to +176 °F)

with FKM O-ring:-40 to +200 °C (-40 to

392 °F)
with FFKM O-ring:-20 to +200 °C (-4 to

+392 °F)

PVDF and alumi-

num/polypropylene lens

versions

-40 to +80 °C

(-40 to +176 °F)

-40 to +80 °C

(-40 to +176 °F)

Содержание SITRANS L














































































































































































































































































Результаты поиска

Содержание SITRANS L

Отзывы:

Siemens SITRANS L, Руководство по эксплуатации, Страница: 24 / 269

Результаты поиска

Содержание SITRANS L

Отзывы: