Siemens SITRANS L Скачать руководство пользователя страница 157

Страница: 157 / 269

Parameter reference

SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH

157

Communication (5.)

Note

Default settings in the parameter tables are indicated with an asterisk (*) unless explicitly

stated.

Tag (5.1.)

Note

The tag can only be changed from a remote master such as NIFBUS-Configurator or DeltaV.

Read only. Text that can be used in any way. A recommended use is as a unique label for a

field device in a plant. Limited to 32 ASCII characters.

Device Address (5.2.)

Note

The address can only be changed from a remote master such as NIFBUS-Configurator or

DeltaV. See

Addressing

in manual

Foundation Fieldbus for Level Instruments

(7ML19985MP01) for further details.

Read only. The unique address of the device on the network.

Values

Temporary range during initial commissioning: 248 - 251. Permanent range

after commissioning complete (written to non-volatile memory in the device):

16-247

Manufacturer (5.3.)

Name of manufacturer associated with this device.

Device Type Identification (5.4.)

Hexadecimal integer defined by Siemens to uniquely identify each product with

manufacturer’s Id. (LR250 FF device=0x1954.)

Device Revision (5.5.)

Manufacturer’s revision number associated with this device.

ITK Version (5.6.)

Major revision number of the interoperability test case used to register this device.

Содержание SITRANS L














































































































































































































































































Результаты поиска

Содержание SITRANS L

Отзывы:

Siemens SITRANS L, Руководство по эксплуатации, Страница: 157 / 269

Результаты поиска

Содержание SITRANS L

Отзывы: