Siemens SITRANS L Скачать руководство пользователя страница 121

Страница: 121 / 269

Parameter reference

SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH

121

Quick Start (1.)

Note

For detailed instructions see Quick Start Wizard via the handheld programmer (Page 54) or

Quick Start Wizard via AMS Device Manager (Page 71).

Setup (2.)

Note

•

See Parameter menus (Page 50) or Operating via AMS Device Manager (Page 65) for

instructions.

•

Default settings in the parameter tables are indicated with an asterisk (*) unless explicitly

stated.

•

Values shown in the following tables can be entered via the handheld programmer.

Identification (2.1.)

Tag (2.1.1.)

Read only. Text that can be used in any way. A recommended use is as a unique label for a

field device in a plant. Limited to 32 ASCII characters.

Note

The tag can only be changed from a remote master such as NIFBUS-Configurator or DeltaV.

Descriptor (2.1.2.)

Read only. Text that can be used in any way. Limited to 32 ASCII characters. No specific

recommended use.
To access this parameter via AMS Device Manager see

Identification

under Identification

(RESOURCE) (Page 92).

Message (2.1.3.)

Read only. Text that can be used in any way. Limited to 32 ASCII characters. No specific

recommended use.
To access this parameter via AMS Device Manager see Identification under Identification

(RESOURCE). (Page 92)

Содержание SITRANS L














































































































































































































































































Результаты поиска

Содержание SITRANS L

Отзывы:

Siemens SITRANS L, Руководство по эксплуатации, Страница: 121 / 269

Результаты поиска

Содержание SITRANS L

Отзывы: