Siemens SITRANS L Скачать руководство пользователя страница 21

Страница: 21 / 269

SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH

Installing/mounting

4.1

Basic safety information

Note
Material compatibility

Siemens can provide you with support concerning selection of parts wetted by process

media. However, you are responsible for the selection of parts. Siemens accepts no liability

for faults or failures resulting from incompatible materials.

WARNING

Unsuitable connecting parts

Risk of injury or poisoning.
In case of improper mounting, hot, toxic, and corrosive process media could be released at

the connections.
•

Ensure that connecting parts (such as flange gaskets and bolts) are suitable for

connection and process media.

WARNING

Exceeded maximum ambient or process media temperature

Danger of explosion in hazardous areas.
Device damage.
•

Make sure that the maximum permissible ambient and process media temperatures of

the device are not exceeded.

Содержание SITRANS L














































































































































































































































































Результаты поиска

Содержание SITRANS L

Отзывы:

Siemens SITRANS L, Руководство по эксплуатации, Страница: 21 / 269

Результаты поиска

Содержание SITRANS L

Отзывы: